120x120x25mm Low Speed DC Fan DC1225G
For equipment requiring a 120mm ventilation opening without the speed and pressure of a high-output fan, DC1225G offers four rated airflow grades and several bearing and voltage configurations.
Cooling requirements are not always solved by choosing the fastest fan. In a 120×120×25mm mounting format, DC1225G provides rated models from 1,500 to 3,000RPM, with airflow ranging from 51.75 to 104.45CFM. These figures describe different model grades, not one adjustable setting.
Rated Voltage: 5V / 12V / 18V / 24V / 48V
Size: 120×120×25mm
Max Airflow: 104.45CFM
Max Static Pressure: 7.34mmH₂O
Max Speed: 3,000RPM
120mm Fan Voltage, Bearing and Speed Specifications
Select the ordering code first, then check its voltage, current, airflow and acoustic rating. The 14 models do not offer every speed at every voltage: 5V has two grades, while 12V, 18V, 24V and 48V have three each. Sleeve, CycleSeal and ball bearing versions require configuration confirmation.
| Model | Bearing Type | Rate Voltage(VDC) | Current (A) | Speed (RPM) | Air Flow (CFM) | Static Pressure (mmH₂O) | Noise Level (dBA) |
|---|---|---|---|---|---|---|---|
| YDM1225X05G | S/C/B | 5 | 0.42 | 2000 | 69.16 | 3.42 | 34.95 |
| YDL1225X05G | S/C/B | 5 | 0.19 | 1500 | 51.75 | 1.95 | 26.73 |
| YDH1225X12G | S/C/B | 12 | 0.61 | 3000 | 104.45 | 7.34 | 45.90 |
| YDM1225X12G | S/C/B | 12 | 0.28 | 2300 | 80.17 | 4.40 | 38.60 |
| YDL1225X12G | S/C/B | 12 | 0.08 | 1500 | 51.75 | 1.95 | 26.73 |
| YDH1225X18G | S/C/B | 18 | 0.41 | 3000 | 104.45 | 7.34 | 45.90 |
| YDM1225X18G | S/C/B | 18 | 0.19 | 2300 | 80.17 | 4.40 | 38.60 |
| YDL1225X18G | S/C/B | 18 | 0.05 | 1500 | 51.75 | 1.95 | 26.73 |
| YDH1225X24G | S/C/B | 24 | 0.25 | 3000 | 104.45 | 7.34 | 45.90 |
| YDM1225X24G | S/C/B | 24 | 0.11 | 2300 | 80.17 | 4.40 | 38.60 |
| YDL1225X24G | S/C/B | 24 | 0.04 | 1500 | 51.75 | 1.95 | 26.73 |
| YDH1225X48G | S/C/B | 48 | 0.13 | 3000 | 104.45 | 7.34 | 45.90 |
| YDM1225X48G | S/C/B | 48 | 0.06 | 2300 | 80.17 | 4.40 | 38.60 |
| YDL1225X48G | S/C/B | 48 | 0.03 | 1500 | 51.75 | 1.95 | 26.73 |
Bearing codes S, C and B denote sleeve, CycleSeal and ball-bearing options; the listed combinations must be confirmed for the ordered configuration.
Construction: glass-fiber-reinforced PBT impeller and housing, UL 94V-0 material rating. Ball and CycleSeal bearing operating temperature: -10°C to +70°C. Insulation resistance: at least 10MΩ at 500VDC. Dielectric test: 500VAC, 60Hz for one minute, leakage current no more than 5mA. FG, RD, PWM, auto restart and polarity protection are optional functions.
Bearing and Low Speed Fan Options for Everyday Ventilation
What matters in this series is the choice of bearing construction, rated noise, DC supply and ventilation level, not simply the highest possible airflow. The following four features support different equipment specifications.
Sleeve, CycleSeal and Ball Bearing Configurations
A buyer may specify a sleeve bearing fan or a ball bearing fan depending on the equipment specification. CycleSeal is another available bearing option. The ordering configuration must identify the bearing type; no unverified service-life ranking is implied.
Defined 26.73dBA Low-Speed Grade
At 1,500RPM, the listed configuration is rated 26.73dBA, 51.75CFM and 1.95mmH₂O. This is the appropriate noise reference for a quiet dc fan requirement, provided its airflow and pressure meet the enclosure demand; the 3,000RPM option is rated 45.90dBA.
Five DC Supply Families Including 18V
DC1225G can be ordered in 5V, 12V, 18V, 24V and 48V families. The 18V option is useful when equipment already uses that rated supply, but the connector, startup current and controller capacity must also match. Voltage families are different products, not interchangeable settings.
Four Performance Endpoints Within One Mounting Format
Rated airflow choices are 51.75, 69.16, 80.17 and 104.45CFM. The matching maximum static pressures are 1.95, 3.42, 4.40 and 7.34mmH₂O. These grades allow a common frame size to serve different ventilation targets without claiming the same performance after installation.
YCCFAN 120mm Fan Design for Air Circulation
Specify the required ventilation duty before choosing a faster 120mm fan.

Many housings already provide a standard 120×120mm opening and 25mm installation depth. DC1225G keeps that mechanical envelope while offering comparatively moderate rated speeds. The useful selection question is whether the enclosure needs 51.75, 69.16, 80.17 or 104.45CFM in free air, and what airflow remains after the grille and internal components impose resistance.
For replacements, mechanical fit alone is not enough. Compare the original fan's nameplate voltage and current, power connector, airflow direction and any tachometer or fault output. DC1225G is a different performance family from the high-output DC1225F, so a shared frame dimension does not make either version a direct substitute for the other.
Airflow and Static Pressure Across Four Rated Speeds
The P-Q curves show why a rated free-air CFM figure cannot be treated as installed airflow. Choose the curve for the actual ordered speed grade, then check its intersection with the equipment resistance curve. The 3,000RPM grade offers up to 104.45CFM at the free-air endpoint and 7.34mmH₂O at the shut-off pressure endpoint; these are not simultaneous operating values.

DC Fan Applications for Equipment Exhaust and Air Exchange
The five scenarios below call for different checks: some prioritize steady cabinet air exchange, others require electrical compatibility or careful fan replacement. Selection still depends on each enclosure's thermal load, flow resistance and rated supply.
Get Cooling Support
Electronic Cabinet Air Exchange
For electronic housings with a 120mm ventilation opening, the lower and middle speed grades can be considered where heat release is moderate and sufficient air paths are available. Intake and exhaust openings should be placed to move air through heat-producing areas rather than allowing a short recirculation loop.

Power Supply Ventilation Compartments
A power supply fan application needs more than a matching frame: input voltage, rated current, connector orientation and airflow across warm components matter. DC1225G offers voltage-specific models, including 18V and 48V, for systems whose existing supply architecture matches those ratings.

Home Appliance Ventilation Zones
Where an appliance includes a suitable 120mm fan bay, the 1,500RPM version provides a listed 26.73dBA noise option. Confirm whether its 51.75CFM free-air rating is adequate under real grille resistance and whether the chosen bearing configuration suits the equipment requirements.

Control Panel Exhaust Openings
Used as a dc exhaust fan in a compatible panel opening, DC1225G can move warm air out of an enclosed control section. Check outlet grille loss, nearby wiring clearance and the required airflow before choosing between the 2,300RPM and 3,000RPM models.

Same-Size Fan Retrofit Projects
An equipment retrofit may retain a 120×120×25mm mounting pattern while changing the electrical interface or expected fan feedback. Compare the original drawing and model label against the replacement specification, particularly when the controller expects FG or RD signals.
120x120x25mm Fan Installation and Operating Demonstration
Inspect the 120×120×25mm frame, mounting positions, cable exit and airflow direction before choosing a DC1225G variant.
Show the DC1225G housing, 25mm side profile and airflow orientation before demonstrating its running behavior. Where multiple rated grades are filmed, label the exact model, voltage and speed on screen so viewers do not mistake them for adjustable settings of a single unit.
The recorded installation should present the actual installed depth, mounting-hole drawing and connector orientation so that engineers can confirm mechanical fit before sampling. Contact YCCFAN for sample requests or the latest test footage of the DC1225G series.
DC1225G Fan Noise, Bearing and Replacement FAQs
A: Not based on size alone. Confirm 25mm clearance, mounting pattern, rated DC voltage, current capacity, airflow direction, connector and any monitoring signal. DC1225G reaches 104.45CFM at its highest listed grade; a faster original fan may require more airflow or pressure than this series provides.
A: The 1,500RPM grade has the lowest listed noise rating at 26.73dBA, paired with 51.75CFM and 1.95mmH₂O. Choose it only if that airflow and pressure meet the installed cooling requirement; the 3,000RPM grade is rated 45.90dBA.
A: Sleeve, CycleSeal and ball bearing options are identified for the DC1225G family. Specify the original equipment's required bearing type and environmental conditions when requesting a quote. The available product information does not establish a universal service-life comparison between the options.
A: No. Select the DC1225G variant rated for the equipment's actual supply voltage. A 12V fan is not an 18V or 24V model, even when the plug looks similar. Check the supply rating, current and polarity before wiring.
A: They identify separate rated ordering models rather than guaranteed selectable modes on a single fan. PWM is listed as an optional function; any actual speed-control range, control signal and startup behavior must be confirmed for the selected model and controller.
A: Rotation alone does not establish signal compatibility. The host may require a particular tachometer (FG) or rotation-detection (RD) output, pin arrangement or signal level. These are optional DC1225G functions, so the exact configured output must match the host interface.

Can't Find the Perfect Fan?
We offer customization services from wire length to full mold design. Get a solution in 48 hours.
Request a DC1225G Sample or Custom Solution
