DC7010 70x70x10mm Slim DC Fan
A low-depth 70mm fan for displays, network terminals and compact housings where installation thickness is tightly controlled.
At only 10mm deep, DC7010 provides a larger 70mm airflow area without the thickness of a standard 25mm frame. Published 3,000, 4,000 and 5,000RPM choices cover 18.11 to 31.16CFM, while 5V, 12V and 24V versions simplify matching different electronics platforms.
Rated Voltage: 5V / 12V / 24V
Size: 70x70x10mm
Max Airflow: 31.16CFM
Max Static Pressure: 4.37mmH2O
Rated Speed: 5,000RPM
Noise Range: 28.30-40.30dBA
5V, 12V and 24V Options for a Slim 70mm Fan
Compare DC7010 by voltage, speed, airflow, static pressure, current, noise and bearing type. Select the required model from the full published specification table rather than choosing only by maximum airflow.
| Model | Bearing Type | Rate Voltage（VDC） | Current （A） | Speed （RPM） | Air Flow （CFM） | Static Pressure （mmH₂O） | Noise Level （dBA） | Weight （g） |
|---|---|---|---|---|---|---|---|---|
| YDL7010X05 | CS or Two Ball | 12 | 0.23 | 3000 | 18.11 | 1.58 | 28.30 | 33 |
| YDH7010X12 | CS or Two Ball | 12 | 0.34 | 5000 | 31.16 | 4.37 | 40.30 | 33 |
| YDM7010X12 | CS or Two Ball | 12 | 0.17 | 4000 | 24.87 | 2.86 | 34.70 | 33 |
| YDL7010X12 | CS or Two Ball | 12 | 0.10 | 3000 | 18.11 | 1.58 | 28.30 | 33 |
| YDH7010X24 | CS or Two Ball | 24 | 0.21 | 5000 | 31.16 | 4.37 | 40.30 | 33 |
| YDM7010X24 | CS or Two Ball | 24 | 0.11 | 4000 | 24.87 | 2.86 | 34.70 | 33 |
| YDL7010X24 | CS or Two Ball | 24 | 0.05 | 3000 | 18.11 | 1.58 | 28.30 | 33 |
Why a 10mm Slim Fan Fits Shallow Equipment
Slim mechanical fit is the starting point, followed by airflow level, voltage and bearing choice.
10mm Profile for Shallow Assemblies
The thin frame reduces the depth consumed by the cooling component in wall-mounted, display and slim enclosure designs.
Three Airflow Levels
18.11, 24.87 and 31.16CFM options let designers match the thermal load without defaulting to maximum speed.
Multi-Voltage Integration
5V, 12V and 24V models cover embedded electronics, conventional control systems and higher-voltage equipment.
Bearing and Control Choices
CycleSeal or ball-bearing options plus FG, RD and PWM functions allow lifecycle and control requirements to be specified separately.
70x70x10mm Slim DC Fan Overview
Unlike a conventional 25mm-deep fan, DC7010 preserves rear clearance for boards and connectors. Selection therefore begins with depth and voltage, then moves to the 3,000, 4,000 or 5,000RPM performance level.
Glass-fiber-reinforced PBT impeller and housing are rated UL 94V-0. Available functions include FG, RD, PWM, Auto Restart and Polarity Protection; final wiring, connector, signal definition and bearing choice should be confirmed for the project.
DC7010 Airflow Curve across Three Speed Levels
Because this 10mm slim fan serves relatively open, shallow enclosures, evaluate the three curves against the resistance created by grilles, nearby boards and limited inlet clearance. If the operating point moves too far left, a deeper fan may be more suitable than simply choosing the fastest DC7010 grade.
Low-Profile Cooling Uses for a 70mm Fan
Suitable projects need a wide but shallow airflow source rather than the pressure of a deep-frame fan.
Get Fan Selection Support
Flat-Panel Displays
The 10mm depth fits display housings where rear clearance is limited and heat must be removed across a broad board area.
Network Terminals
Routers, gateways and access terminals can use the 70mm face area when a thin enclosure cannot accept a conventional fan depth.
Wall-Mounted Controllers
Low-profile control panels benefit from the 24V option and shallow mechanical envelope.
Compact Consumer Electronics
5V versions can be evaluated for compact electronic products with moderate airflow demand and strict thickness limits.
Instrument Cooling
Measurement and test instruments can use lower-speed variants where space, airflow and acoustic targets must be balanced.
70x70x10mm Slim Fan Fit and Clearance Video
Focus the demonstration on the 10mm depth, mounting clearance and airflow path inside a shallow enclosure. Include the exact voltage, speed grade and connector visible in the test.
Focus the demonstration on the 10mm depth, mounting clearance and airflow path inside a shallow enclosure. Include the exact voltage, speed grade and connector visible in the test.
70mm Slim Fan Size and Voltage FAQs
A: DC7010 uses a 70x70x10mm frame. Confirm mounting-hole spacing and clearance with the product drawing before installation.
A: Published options include 5V / 12V / 24V. Select the exact model according to rated voltage, current and controller compatibility.
A: The published range reaches 31.16CFM and 4.37mmH2O. Use the P-Q curve for the actual operating point.
A: FG, RD and PWM are listed as function options. Signal voltage, frequency, wiring and minimum duty must be confirmed before connection.
A: The product range lists cycleseal or ball bearing. Confirm the bearing code, operating temperature and expected service conditions with the selected model.
A: Project-specific voltage, speed, wire length, connector and control functions can be discussed. Performance must remain tied to an approved model and sample validation.
Can't Find the Perfect Fan?
We offer customization services from wire length to full mold design. Get a solution in 48 hours.
Get Fan Selection Support